Fully automatic control system for reptile and animal basking zones with one or two BaskZone® 1.5kW shortwave infrared heaters. Heat output can be adjusted in fine increments to provide the desired temperature. Daily on and off times are set using the CC3 7-day time programmer. A high limit safety cut-out will turn the heaters off if the ambient temperature inside the enclosure reaches a user-defined pre-set level.
Note: when the BaskZone® heat output is reduced, energy consumption is also lowered.
CC3-4M Controller
Maximum load | 4kW |
Power supply | 230 – 250Vac ~50-60Hz. |
Ingress Protection | IPX5 (moisture & splashproof) |
Dimensions | 275 x 80 x 200mm (wdh) |
IP rating | IP65 |
Mains cable | 2.5mm² |
CC3 Time Programmer
Power supply | 230 – 250Vac ~50-60Hz. |
On periods | Up to 3 per day |
Dimensions | 147 x 30 x 85mm (wdh) |
IP rating | IP30 |
Controller cable | 2 wire low voltage pair |
CC3 Temperature Sensor
Type | NTC Thermistor |
Accuracy | ±0.2°C |
Dimensions | 113 x 50 x 110mm (wdh) |
IP rating | IP65 |
Controller cable | 2 wire low voltage pair |
Can't see what you want?
For fast, friendly advice, just ring 01424 883344.
For fast, friendly advice, just ring 01424 883344.